Do not know how to decorate the balcony with plastic panels? In this there is nothing complicated
Sooner or later the question arises: "Is not it time to refine the balcony?" In our time, plastic windows and warm floors, it can become a full-fledged room, which you can easily use as an office or "chilaut." In this article, we will try to explain simply and clearly how to trim the balcony with plastic panels.
"Pros and cons"
First, plastic panels are inexpensiveand easy to install material. So, faced with the question of how to trim a balcony with plastic panels, even a beginner can find the answer. But it should be taken into account that not all panels are suitable for installation in the "room" we are interested in - temperature differences can spoil a large number of materials. Therefore, the plastic panels that you will install there must be very narrow. They are more resistant to cracking and will be able to resist even the most severe frost. Of the advantages of the construction element discussed by us, we can note a wide range of color solutions and, of course, their durability.After you finish the balcony with plastic panels with your own hands, you can forget about the cosmetic repair of this room for about twenty years.
Where to begin
Let's say you were able to opt fora certain variety of panels. Even the choice of colors did not become problematic for you. Now we need to discuss the most complicated procedure of this construction process. Speech, as you already probably understand, will go about how to trim the balcony with plastic panels. And the first thing you need to decide is to put a wooden frame or you can do with glue composition. In the second case, the installation of the panels will be much faster, but this can be done only on fairly even walls. And if the walls are not ideal, or you want to not only trim the balcony, but also to insulate it, it is better to still choose your skeleton.
To install the frame is perfect aswooden, and polyvinyl chloride bars (4 x 2.5 cm). First, you need to fix them to the ceiling or walls, while observing a step of 50 cm. Mount must be perpendicular to the plastic panels, so we recommend you to verify this with a level. The voids between the lining and the frame should be filled with insulation material. After that, we turn to the solution of the problem, how to sew balcony with their own hands. We fasten the fastening elements to the frame(inner and outer corners, starting strip) and insert the first panel. Do the final level check (the panel should be located strictly perpendicular to the floor).
It remains only to fix the starting strip. After that, we insert the next panel. Remember that there should be no gaps between the panels, and the last element should first be inserted into the inner corner, and then into the groove of the previous panel. Here, perhaps, and all the wisdom that will help resolve the issue of how to trim the balcony with plastic panels.