How can I clean the soleplate of an iron?
How can I clean the soleplate of an iron?
- In any household. departments, as well as in shops selling fabrics and accessories, there is a special pencil for cleaning the sole of the iron.
- Old proven and cheap way: pour salt on a piece of newspaper and iron it with a heated iron.
- any cleaning cream, you can and toothpaste is the cheapest - the iron should be warm, but hot
- The same as cleaning the glass ceramic plates.
- try a cloth with ammonia
- there is a special pencil
- How to clean the iron at home
How to clean the iron at home
Very often an unpleasant coating is formed on the sole of the iron, which is difficult to clean and which prevents ironing. There is a similar problem due to the fact that you neglect the temperature regime that the manufacturer recommends. Remember that for silk and synthetics it is not necessary to heat the iron too much, and it is better to iron woolen things with a hot iron through gauze soaked in water. If you have the task to clean the iron from the scum, then you can clean the iron in several ways.
You will need:
water, rags, salt, vinegar, cleanser Silicate, soda, sponge
One of the modern methods that will help you cope with this task is a special pencil that is designed to clean the soles of the iron from the deposit. You can buy it at a hardware store. It is easy and convenient to use. Preheat the iron, grind its sole with a pencil and wait, the contamination on the surface will begin to melt. After that, wipe the sole with a dry cloth and allow the iron to cool. Then rinse it with clean water to rinse off chemical reaction residues from the surface of the sole. When a pencil and a hot iron come in contact, a sharp unpleasant smell develops-the evaporation of ammonia. Try to observe the safety rules, do not forget to wash your hands after you finish the work.
To clean the iron, you can use the old method. Pour a large slide of salt on the newspaper and iron it, as if ironing. Try to press hard on the iron so that the salt is squeezed out from under the sole, and the iron touches the newspaper. You will see that the newspaper and salt will become darker - that means the iron is cleaned. If the dirt on the iron is not all gone, then again heat it and repeat all over again. This method will help you clean the iron thoroughly. After the iron has cooled, wipe the sole with a damp cloth and then dry.
Another uncomplicated way will help you clean the iron. Take the soda, dilute it with a small amount of detergent before the formation of gruel and apply a sponge on the soleplate of the iron. Try to rub the surface intensively and continuously. Then leave the iron for a while, so that the sole is impregnated with this compound, only after that, rinse the iron with water and wipe with a dry rag. When you clean the iron in a similar way to heat it is not necessary.
There is still a popular method to clean the iron - it's vinegar. When there is nothing at home, you can use this method. Take a rough cloth (an old towel), moisten it with vinegar and rub it with effort into the surface of the sole. If you can not clean the iron the first time, then repeat. Vinegar exhales quickly, so moisten a rag as often as possible. After you clean the soleplate of the iron, heat it and iron over an unnecessary rag. Now your iron will be clean.
If rust is formed on the surface of the iron, then you pour cold water into it from the tap, and you should not do this. Use only distilled water, due to its chemical properties, it does not form a scale inside the iron. To get rid of rust, pour water into the iron with antinakipin (half a teaspoon into a glass of water), heat the iron and let it stand 20 or 30 minutes, so that the scum falls behind, and then rinse it. Now you can safely use the iron and not be afraid that rusty stains will appear on the linen.
Many mistresses, to get rid of rust, use a cleaner Silit. This is done so. Warm the iron, turn it upside down and apply the product directly into the holes. Wait a few minutes for 5-10, and you will see how the dirt will come out of the soles. Collect dirt with a sponge, especially carefully select it from the holes of the sole, and then rinse with warm water and wipe with a dry cloth. Now you can iron perfectly pure iron.