How to disassemble the machine?
Before disassembling the machine must be prepared. You need to stand in front of the table where you will disassemble the machine. You can, of course, do without stools. Now you need to cover the surface of the table with any cloth in order not to damage or scratch the table.
If you have a sports interest awakened - disassemble the machine for a while. Standard in the army: for 15 seconds to disassemble, for 25 seconds to assemble the machine gun. It turns out 40 seconds to assemble and disassemble. But if you practice it after a week of training, you can do all these actions even in 30 seconds. Consider the stages of disassembly and assembly of the machine.
How to disassemble the Kalashnikov assault rifle
- Separate the magazine (horn) with cartridges from the machine, grabbing the magazine with your right hand, and holding the magazine lever with your thumb.
- Pull the automatic circuit breaker off, direct the muzzle of the automaton to the ceiling (sky) and make a control shot (pull the trigger). This action is necessary and necessary because one cartridge can still be in the machine,even when the horn is separated or empty.
- Pull out the pencil case that is in the rifle butt. It is removed by simply pressing a finger. This box contains all the tools (screwdrivers) of a small size that are necessary for repairing the machine.
- Knock the automatic cleaning rod from under the barrel. It must be knocked out and not pulled out. Do this edge or heel of the palm. Don't hit hard to avoid hurting your hand.
- Separate the receiver cover from the machine.
- Separate the return mechanism. This is a long spring that you just need to pull out.
- Separate the bolt with bolt carrier from the receiver. These two mechanisms are interconnected, so they need to be separated.
- Separate the bolt from the bolt carrier.
- Separate the gas tube with the receiver lining from the barrel machine.
Parts and mechanisms of the machine during disassembly are arranged in order of disassembly, so that when assembling the machine was easier. Now you know how to disassemble the machine!
How to assemble a Kalashnikov assault rifle
- Insert the gas tube with the receiver lining into the barrel of the machine.
- Insert the bolt into the bolt carrier.
- Insert bolt with bolt carrier in the receiver.
- Insert the return mechanism into the machine and snap into place, making sure that it fits into place.
- Replace the cover of the receiver and press it.
- Thrust the automatic ramrod under the barrel. It is necessary to drive a little into place.
- Put the pencil case into place.
- Direct the barrel of the machine to the ceiling (sky) and make a test shot (pull the trigger).
- Now put the machine on fuse.
- Attach a magazine (horn) with cartridges.
Now you know how to disassemble and assemble the machine! This knowledge will be useful to you in practical classes on assembling weapons, for example, in the army.